Lime powder is limestone, dolomite or chalk and other raw materials, calcined to calcium oxide derived from the gas as the main ingredient rigid inorganic cementitious material, widely used in building materials, chemical industry. Lime powder by crushing limestone and other raw materials, calcination, grinding after the formation of limestone crushing equipment are: impact crusher, cone crusher, hammer crusher, impact crusher, high crushing machine. New! Henan Hongxing jaw crusher series are based on years' experience and technology development.The continuous improvement and refinement have made them the preferred jaw crusher for professionals and our customers.They can meet most crushing requirements in primary and secondray crushing,and the largest compression resistance of the material is 320MPa.This series are widely used in stone mining,metallurgical,construction,smelting,hydraulic and chemical industries,etc.

In the process of use crusher to regular inspection, ensure the good and stable operation. The followings are the process of maintenance crusher bearing disassembled and installation method.

1). Remove the bearing note: bearing the removal of the preventive maintenance is or because of the operation anomalies need to replace bearings with. Preventive maintenance of need to replace bearing the often bearing, remove the bearings with the reason of abnormal happen to know, to prevent abnormal happen again. At least do it reserves the followings:

Collect and keep use lubricant; Keep damage bearing; Keep records of irregularities during operation; Keep running when the situation down the abnormal bearing. (Jaw crusher)

2). Bearing installation: Install the bearing there are many ways, the same operation after installation process. Bearing After the installation, be sure to tilt the outer coating bearing lubricant.

A. Lubricant coating (Cone crusher)

(1) grease lubrication coating cover all roller surface when, after besmear will the position of the outer recovery.

(2) will apply all roller surface oil, apply to the position of the outer ring after recovery.

B. After coating finished, cover with plastic film and other dust.

Crusher in the best repair technicians in the professional under the guidance and avoid unnecessary damage to the equipment. The daily production process in the functioning of the equipment to monitor the timely resolution of problems. (Limestone crusher)